![]() ![]() There is also a problem with the placement of some holes. FUSION 360 FORUM CODEThere is an RS-274D post processor, so I would have thought that this would be the best post to use, however the code as interpreted by UCCNC does not detect arcs, so my nice radiused parts are shown as square edge parts. FUSION 360 FORUM MANUALThe user manual for UCCNC suggests that the software can interpret RS-274 compliant code. I have to do each operation seperately to get the best, most consistent results. The best luck I've had soo far is with the WinCNC post processor, which has worked well for peck drilling (won't do straight through drilling) and 2D contours with tabs soo far. ![]() ![]() The CAM module in Fusion 360 comes with a number of post processors for generating code. ngc and bingo finish save and then load file into Axis and Gmoccapy and it loaded WOO a huge step has been made so now was to see if it will run but (not) just had to delete the T0101 and tried again and it worked, is there still to improve hell yes but this is a start some days things don't work and weeks are spent trying to figure it out and other days it all falls into place just like if I no what I'm doing.I don't suppose that anyone else has tried this combination? FUSION 360 FORUM ZIP FILEMy hat is off to you Robban as I continue my with Linuxcnc stuff earlier this year we bought our Mesa board and have been able to make somethings work which has been a big milestone but like everything else there was still some road blocks and one biggie is a post processor a lathe until I came across your post so what the heck just as of yesterday well what do I have to loose so I downloaded your zip file mind you I will be the first person to say I do not no what I'm doing when it comes to software but over time I might get things working just like what happen yesterday so once downloaded and Fusion open we created a tool path of a small part and then processed to post to but once in that screen we pull down the menu from and selected Tormach post open config and copy the zip file and replace what was there and then edit the file extension with. This might not exactly match Fanuc, but the behaviour is easy to change T0201 = select and load tool 1 and apply offsets 2 T0101 = select and load tool 1 and apply offsets 1 T1 = select and load tool 1, and apply the base offset for tool 1 "An example of combining the G43.2 compound offset idea with remapping to create Have a look at the lathe-fanucy sim config for an example of how this works. ![]() In this setup G43 is assumed, though you can have separate tool and wear offsets. For a lathe this is probably more convenient, the only reason to separate tool-select and tool-change (TN then M6) is because mills can pre-fetch tools, whereas lathes typically can't. If the tool-changes are a T-only version then this matches how Tormach has things arranged and it is possible to configure LinuxCNC the same way. So far I have found that threading does not work correctly, tool calls are incorrect and lastly you have to have M6 coded to call G43 for all tools. Please Log in or Create an account to join the conversation. What am I doing wrong? Is there another cps file specifically for lathe work?Ĭan I use another turning cps file that already ships with fusion and trust that that would work? I don't read Gcode, so I don't really know what I'm looking at but don't want to cause a crash. If I select "Turning" in the drop down next to the cps selection, no emc cps files appear. Vendor url: Legal: Copyright (C) 2012-2015 by Autodesk, Inc.Įrror: Turning toolpath is not supported by the post configuration.Įrror: Failed to invoke 'onOpen' in the post configuration. When I try and generate the code, I get an error saying: I select the emc.cps file for post configuration. I am using Fusion 360 CAM to generate Gcode the same way I have done with my mill. Until now, I have just been using LinuxCNC to drive a modified Emco Compact 5. I have done lots of manual lathe work, and am currently running LinuxCNC on my mill. Let me start by saying that I am a novice CNC lather. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |